Georgiou Group were awarded a land development project in Alkimos, WA, which involved moving 600 000 cubic meters of sand, rock and limestone 1.5 kilometers between the cut and fill zones. Wanting to improve productivity and cost control they…
00IT Supporthttps://sitechnz.co.nz/wp-content/uploads/2025/08/SITECH_Trimble-Logo_blue.pngIT Support2016-04-14 12:27:282017-06-07 13:56:57Connected Site Finishes two months early
You probably saw our article back in January about maintenance routines to keep your GCS performing in top condition. In it we shared a video from our counterparts in the US.
While most of this information is accurate and best practice to…
00IT Supporthttps://sitechnz.co.nz/wp-content/uploads/2025/08/SITECH_Trimble-Logo_blue.pngIT Support2016-04-10 10:34:142018-10-16 09:45:58Update to your GCS maintenance routine
Transfer a Benchmark across a worksite using a Benchpoint using the touch point feature with Trimble GSCFlex. See how in this video.
00IT Supporthttps://sitechnz.co.nz/wp-content/uploads/2025/08/SITECH_Trimble-Logo_blue.pngIT Support2016-04-05 10:13:482016-04-05 10:13:48Transferring Elevation Reference from a Benchpoint
Dozers and motor graders are the machines most people enhance with GPS/GNSS machine control – it makes sense, they do the ‘hard yards’ but what about small jobsites or confined spaces? Until Trimble brought out its GCS900 version 12.81…
00IT Supporthttps://sitechnz.co.nz/wp-content/uploads/2025/08/SITECH_Trimble-Logo_blue.pngIT Support2016-03-22 09:18:122016-07-14 16:06:29GPS on wheel loaders
When Danish contractor Per Aarsleff started the construction of its new headquarters they had to excavate and remove 45,000 cubic meters of earth and clay. In order to be profitable it was important to control costs and one way to do this is…
00IT Supporthttps://sitechnz.co.nz/wp-content/uploads/2025/08/SITECH_Trimble-Logo_blue.pngIT Support2016-03-16 09:16:532016-07-14 16:09:08Fully equipped to avoid expensive under-loading
Connected Site Finishes two months early
Case StudiesUpdate to your GCS maintenance routine
Tips and TricksTransferring Elevation Reference from a Benchpoint
UncategorizedGPS on wheel loaders
UncategorizedFully equipped to avoid expensive under-loading
Case Studies